Loading timer…
23 Reward Points
OXVA Xlim V3 Top-Fill Replacement Pods 3ml (3-Pack)
OXVA Xlim V3 Top-Fill Replacement Pods 3ml (3-Pack)
31 in stock
Regular price
£7.99 GBP
Sale price
£7.99 GBP
Regular price
£7.99 GBP
Unit price
per
Tax included.
Couldn't load pickup availability
Frequently Bought Together
OXVA Xlim V3 Replacement Pods – 3 Pack (UK)
Engineered as official replacement consumables for the OXVA XLIM series, the OXVA Xlim V3 Replacement Pods are sold in a pack of 3, each carrying a 3ml top-fill capacity with a pre-installed integrated mesh coil and an upgraded leak-resistant construction built around reinforced silicone gaskets. Available across four resistance options — 0.4Ω, 0.6Ω, 0.8Ω, and 1.2Ω — the V3 pod covers the full spectrum from tight MTL draws at lower wattages up to RDL and restricted DTL output at higher power ranges, making it a single replacement format compatible with the varied power outputs across the XLIM device lineup. A transparent pod body provides continuous visibility of the remaining e-liquid volume without removing the pod from the device.
Compatible with the OXVA Xlim Pro, Xlim SE, Xlim SE 2, Xlim SQ, Xlim SQ Pro, Xlim Go 2, and most devices across the XLIM series. Not compatible with the first-generation OXVA Xlim C.
Who Are These Pods Best For?
The OXVA Xlim V3 Replacement Pod is the correct replacement consumable for any adult vaper running a compatible XLIM series device who requires a reliable, multi-resistance pod with a straightforward top-fill system. The four available resistance options make this pod suitable for vapers across a wide range of styles — the 1.2Ω variant suits those using nicotine salt e-liquids or 50/50 formulations at a tight MTL draw, while the 0.4Ω and 0.6Ω options serve vapers preferring a looser RDL or restricted DTL draw at higher wattages with sub-ohm capable freebase e-liquids. The upgraded leak-resistant build makes it particularly well-suited to daily carry use where pod integrity under variable conditions matters.
Why Choose the OXVA Xlim V3 Replacement Pods?
- Top-Fill Design via Silicone Stopper – The top-fill port sealed by a silicone stopper allows fast, mess-free e-liquid loading without detaching the pod from the device, reducing spillage and downtime between refills compared to side or bottom-fill alternatives
- Upgraded Leak-Resistant Construction – Reinforced internal seals combined with precision-fitted silicone gaskets form a closed liquid pathway that significantly reduces the likelihood of leaks during standard use, transport, and temperature fluctuations
- Integrated Mesh Coil for Consistent Output – Each pod ships with a factory-installed mesh coil that distributes heat uniformly across the e-liquid contact surface, producing stable flavour accuracy and consistent vapour temperature from the first draw through to the end of the pod's usable life
- Four Resistance Options Covering MTL and RDL – The 0.4Ω (26–30W), 0.6Ω (20–25W), 0.8Ω (12–18W), and 1.2Ω (10–12W) options allow a single pod format to serve genuinely different vaping styles and e-liquid types without requiring a separate device or coil platform
- 3ml Pod Capacity with Transparent Body – The 3ml chamber holds a practical volume for extended daily use, and the clear pod body allows liquid level monitoring at a glance without interrupting a session
- Pack of 3 for Extended Supply – Sold in a three-pod pack, providing a rotation of replacement units that reduces the frequency of reordering and ensures a spare is always available when coil performance begins to decline
Product Specifications
| Pod Capacity | 3ml (Top-Fill) |
| Coil Type | Integrated Mesh Coil (Pre-Installed) |
| Fill Type | Top-Fill via Silicone Stopper |
| Resistances Available | 0.4Ω / 0.6Ω / 0.8Ω / 1.2Ω |
| Pack Size | 3 Pods Per Pack |
| Vaping Styles Supported | MTL / RDL / Restricted DTL |
| Suitable For | Adults 18+ Only |
Resistance Options and Recommended Use
Each resistance variant is optimised for a specific wattage range and draw style. Selecting the correct resistance for your device output and preferred e-liquid type is the most important factor in achieving consistent flavour and vapour quality from the V3 pod.
| Resistance | Recommended Wattage | Vaping Style |
|---|---|---|
| 0.4Ω | 26–30W | RDL / Restricted DTL |
| 0.6Ω | 20–25W | RDL / Smooth Draw |
| 0.8Ω | 12–18W | MTL |
| 1.2Ω | 10–12W | MTL / Nicotine Salts |
Compatible Devices
The OXVA Xlim V3 Replacement Pod is compatible with the following devices in the XLIM series:
- OXVA Xlim Pro
- OXVA Xlim SE / SE 2
- OXVA Xlim SQ / SQ Pro
- OXVA Xlim Go 2
- Most devices across the XLIM series
Note: Not compatible with the first-generation OXVA Xlim C model.
Installation and Best Use
To install a V3 pod, remove the previous pod from the XLIM device and press the replacement into position until it seats securely. Fill via the top-fill port by lifting the silicone stopper, adding e-liquid directly into the chamber up to the 3ml maximum, and reseating the stopper firmly before vaping. Allow 3–5 minutes for the mesh coil to fully saturate before taking the first draw — this priming step prevents dry hits and extends the coil's usable lifespan. Match the resistance to the wattage output on your device using the resistance guide above. When flavour quality or vapour volume begins to noticeably decline, replace the full pod rather than attempting to clean or re-saturate the coil, as the mesh element is integrated and not user-serviceable.
About OXVA
OXVA is a UK and internationally distributed vape hardware brand with a focused product line centred on the XLIM pod system platform. The XLIM series has become one of the most widely adopted pod kit formats in the UK market, recognised for its consistent coil performance, compact build quality, and broad resistance range. The Xlim V3 pod represents the current generation of OXVA's replacement consumable for the XLIM platform, incorporating top-fill access and upgraded leak resistance as the primary improvements over earlier pod revisions.
Important Information
- For adult smokers and vapers only (18+)
- Contains nicotine — an addictive substance
- Not compatible with the first-generation OXVA Xlim C model — verify device compatibility before purchasing
- Coils are integrated and cannot be replaced separately — replace the full pod when performance declines
- Fill only to the 3ml maximum capacity and reseat the silicone stopper fully after each refill to maintain the leak-resistant seal
- Allow 3–5 minutes of coil saturation time after filling before first use
- Not recommended for pregnant or breastfeeding women, people with heart conditions, or those with sensitivity to nicotine
- Store in a cool, dry place away from direct sunlight and heat sources
- Keep out of reach of children and pets at all times
Frequently Asked Questions
Are the Xlim V3 pods leak-resistant?
Yes. The V3 pods feature upgraded internal seals and precision-fitted silicone gaskets. Ensuring the silicone stopper is fully reseated after each top-fill is the most important step in maintaining the seal during use.
Which resistance should I choose?
Use 0.8Ω or 1.2Ω for MTL vaping with nicotine salts or 50/50 e-liquids at 10–18W. Use 0.4Ω or 0.6Ω for RDL or restricted DTL vaping at 20–30W with higher-VG freebase e-liquids.
Can the coil be replaced separately?
No. The mesh coil is integrated into the pod body and is not user-serviceable. When flavour or vapour output declines noticeably, replace the entire pod.
How many pods come in a pack?
Each pack contains 3 OXVA Xlim V3 replacement pods with pre-installed mesh coils in your chosen resistance.
Why Buy From UK Vape Kings?
- 100% Genuine UK Stock
- Fast UK Dispatch
- Low Prices
- TPD Compliant Products
- Excellent Customer Support
- Wide Range of Vape Products
Browse our full range of E-Liquids, Shortfills, Nicotine Salt E-Liquids and Vape Kits.
Package Includes: 3x OXVA Xlim V3 Replacement Pods (pre-installed mesh coil, chosen resistance)