Loading timer…
23 Reward Points
Oxva NeXlim Replacement Pod Cartridges - 4ml 3pcs/pack
Oxva NeXlim Replacement Pod Cartridges - 4ml 3pcs/pack
47 in stock
Regular price
£7.99 GBP
Sale price
£7.99 GBP
Regular price
Unit price
per
Tax included.
Couldn't load pickup availability
OXVA NeXlim Replacement Pod Cartridges (UK)
Engineered as the official replacement consumable for the OXVA NeXlim Pod Vape Kit, the OXVA NeXlim Replacement Pod Cartridges integrate UNITECH 2.0 dual mesh coil technology within a 5-layer leak-proof pod structure, delivering stable flavour output and consistent vapour production across a 4ml e-liquid capacity. Three resistance variants — 0.6Ω, 0.8Ω, and 1.2Ω — cover the full spectrum from Restricted Direct to Lung through to tight Mouth to Lung draw styles, with compatibility across both nicotine salt and freebase e-liquid formulations. The top-fill port allows clean, tool-free refilling without removing the pod from the device, eliminating liquid handling mess between fills.
Compatible exclusively with the OXVA NeXlim Pod Kit. Each pack contains pods in the selected resistance option.
Who Are These Pods Best For?
The OXVA NeXlim Replacement Pod Cartridges are the designated consumable for existing NeXlim Kit owners seeking a straightforward, performance-consistent refill cycle. The three resistance options make the range well-suited to adult vapers at different stages — the 1.2Ω variant serves those transitioning from cigarettes or single-use formats who require a tight MTL draw with nicotine salt e-liquids, while the 0.6Ω and 0.8Ω options serve established vapers who prefer a more open, airier RDL draw with freebase e-liquid at lower nicotine concentrations. The 4ml capacity and top-fill system particularly suit vapers who prioritise a low-maintenance, high-capacity refill format without dismounting the pod mid-session.
Why Choose the OXVA NeXlim Replacement Pod Cartridges?
- UNITECH 2.0 Dual Mesh Coil Technology – OXVA's second-generation coil architecture distributes heat uniformly across dual mesh contact surfaces, producing consistent flavour accuracy and vapour temperature stability from the first draw through to end of coil life, with a marked reduction in dry-hit occurrence compared to single-coil pod formats
- 5-Layer Leak-Proof Pod Structure – A five-stage internal sealing construction prevents e-liquid from bypassing the coil assembly during storage, transit, and active use — maintaining clean device contacts and eliminating the pocket-leaking issue common to simpler single-seal pod designs
- 4ml E-Liquid Capacity – The 4ml pod chamber provides an extended refill interval between top-ups, reducing daily fill frequency for moderate-to-heavy users while remaining within a practical, portable pod footprint
- Three Resistance Options Across MTL and RDL Draw Styles – The 0.6Ω variant delivers an open RDL draw suited to freebase e-liquids; the 0.8Ω offers a hybrid MTL/RDL airflow suited to either e-liquid type; and the 1.2Ω provides a tight, cigarette-adjacent MTL draw configured for nicotine salt use — covering the full range of user draw preference in a single consumable range
- Top-Fill Design — No Pod Removal Required – The integrated top-fill port accepts e-liquid directly without dismounting the pod from the NeXlim device, reducing the risk of liquid spillage on device contacts and simplifying the refill process to a single-step operation
- Nicotine Salt and Freebase E-Liquid Compatibility – The pod construction and coil resistance range are calibrated to perform correctly with both nic salt formulations (typically 10–20mg/ml, higher VG/PG flexibility) and freebase e-liquids (typically 3–6mg/ml, higher VG ratios for RDL output), giving users full flexibility over their e-liquid choice
Product Specifications
| Compatible Device | OXVA NeXlim Pod Kit Only |
| Pod Capacity | 2ml (UK TPD Compliant) / 4ml Standard | |
| Resistance Options | 0.6Ω / 0.8Ω / 1.2Ω |
| Coil Type | Dual Mesh (UNITECH 2.0) |
| Refill Type | Top-Fill |
| E-Liquid Compatibility | Nicotine Salt and Freebase |
| Vaping Style | MTL / RDL (Resistance Dependent) |
| Suitable For | Adults 18+ Only |
Resistance Options and Draw Style Guide
| 0.6Ω | Restricted Direct to Lung (RDL) — an open, airier draw suited to freebase e-liquids at lower nicotine concentrations, producing higher vapour volume per draw |
| 0.8Ω | MTL / RDL Hybrid — a mid-resistance option compatible with both nicotine salt and freebase formulations, offering a draw tightness between full MTL and open RDL for vapers who prefer a transitional airflow |
| 1.2Ω | Mouth to Lung (MTL) — a tighter, cigarette-adjacent draw resistance configured for nicotine salt e-liquids at 10–20mg/ml, delivering a defined throat hit and fast-acting nicotine absorption per draw |
Installation and Best Use
To install a replacement pod, remove the depleted cartridge from the NeXlim device and seat the new pod firmly until it registers a secure connection with the device contacts. Before the first draw on a new pod, fill via the top-fill port and allow a minimum priming period of 3–5 minutes for the e-liquid to fully saturate the dual mesh coil — drawing before adequate saturation risks a dry hit that can degrade the coil surface and alter the flavour profile. For the 0.6Ω RDL variant, freebase e-liquids with a 70/30 VG/PG ratio or higher are recommended to match the coil's power range. For the 1.2Ω MTL variant, nicotine salt formulations at a 50/50 VG/PG ratio deliver the most stable output. Refilling through the top-fill port does not require pod removal — open the fill port, top up to the maximum fill line, and reseal before use. Replace the pod when flavour output or vapour production noticeably diminishes, as continuing to draw on a spent coil surface will affect the e-liquid quality remaining in the chamber.
About OXVA
OXVA is a hardware-focused vape manufacturer recognised internationally for engineering pod and mod systems with an emphasis on coil technology advancement and leak resistance. The NeXlim platform represents OXVA's application of UNITECH 2.0 dual mesh architecture to a refillable pod format, combining the flavour consistency of advanced coil construction with a practical, user-serviceable pod system. OXVA products are distributed across major markets and are available through authorised UK retailers. Further information about OXVA's hardware range is available at OXVA.com.
Important Information
- For adult smokers and vapers only (18+)
- This product contains nicotine, which is an addictive substance
- Compatible exclusively with the OXVA NeXlim Pod Kit — not interchangeable with other OXVA devices or third-party pod systems
- Select resistance based on preferred draw style and e-liquid type — incorrect pairing may affect performance and coil longevity
- Allow adequate coil priming time before first use to avoid dry hits and premature coil degradation
- Not recommended for pregnant or breastfeeding women, people with cardiovascular conditions, or those with sensitivity to nicotine
- Store in a cool, dry place away from direct sunlight and heat sources
- Keep out of reach of children and pets at all times
- UK TPD compliant — verify e-liquid nicotine strength compliance before use
Frequently Asked Questions
Are these compatible with other OXVA devices?
No. The OXVA NeXlim Replacement Pod Cartridges are engineered specifically for the OXVA NeXlim Pod Kit and are not interchangeable with other OXVA pod systems, including the Xlim series or any third-party device. Using the pods with an incompatible device will result in incorrect fit and no electrical connection.
Which e-liquids are compatible and what ratio is recommended?
Both nicotine salt and freebase e-liquids are compatible across the three resistance options. For the 1.2Ω MTL variant, nicotine salt at 10–20mg/ml with a 50/50 VG/PG ratio is recommended for optimal coil saturation and throat hit. For the 0.6Ω RDL variant, freebase e-liquid at 3–6mg/ml with a 70/30 VG/PG ratio or higher delivers the most consistent output. Allow 3–5 minutes priming time after filling before drawing to prevent dry hits.
What is UNITECH 2.0 coil technology?
UNITECH 2.0 is OXVA's second-generation dual mesh coil architecture, which distributes heat uniformly across two mesh contact surfaces simultaneously. This produces more consistent flavour accuracy, a more stable vapour temperature across the draw, and a reduced likelihood of dry hits or hot spots compared to single-mesh or standard coil pod designs. The technology operates across all three resistance options in the NeXlim pod range.
How does the top-fill system work?
The NeXlim pod features an integrated top-fill port that accepts e-liquid directly without removing the pod from the device. Open the fill port cap, insert your e-liquid nozzle, fill to the maximum fill indicator line, and reseal the port before use. The 5-layer leak-proof pod structure prevents e-liquid bypass during and after filling, keeping device contacts dry and eliminating the mess associated with side-fill or bottom-fill pod formats.
Why Buy From UK Vape Kings?
- 100% Genuine UK Stock
- Fast UK Dispatch
- Low Prices
- TPD Compliant Products
- Excellent Customer Support
- Wide Range of Vape Products
Package Includes: OXVA NeXlim Replacement Pod Cartridges (Chosen Resistance)