{"product_id":"oxva-nexlim-replacement-pods","title":"OXVA NeXLIM UNITECH 3.0 (V2) Replacement Pods XL – 3 Pack","description":"\u003csection class=\"product-description\"\u003e\n\u003ch2\u003eOXVA NeXLIM UNITECH 3.0 (V2) Replacement Pods – 4ml XL, 3 Pack\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eOXVA NeXLIM UNITECH 3.0 replacement pods\u003c\/strong\u003e, often searched for as \u003cstrong\u003eOXVA NeXLIM V2 pods\u003c\/strong\u003e, are refillable top-fill cartridges made for the OXVA NeXLIM device family. Each retail pack contains three cartridges in the resistance selected above: \u003cstrong\u003e0.6Ω\u003c\/strong\u003e or \u003cstrong\u003e0.8Ω\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eEach cartridge combines a \u003cstrong\u003e4ml XL e-liquid chamber\u003c\/strong\u003e with an integrated dual-mesh coil. When the coil reaches the end of its useful life, the complete pod is replaced, so there are no separate coils to remove or install.\u003c\/p\u003e\n\u003ch3\u003eKey product details\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine OXVA NeXLIM UNITECH 3.0 replacement cartridges\u003c\/li\u003e\n\u003cli\u003e4ml XL refillable e-liquid capacity\u003c\/li\u003e\n\u003cli\u003eIntegrated dual-mesh coil construction\u003c\/li\u003e\n\u003cli\u003eTop-fill port for routine refilling\u003c\/li\u003e\n\u003cli\u003eAvailable from this listing in 0.6Ω and 0.8Ω\u003c\/li\u003e\n\u003cli\u003eSuitable for MTL and RDL use, depending on resistance and airflow\u003c\/li\u003e\n\u003cli\u003eThree same-resistance cartridges per pack\u003c\/li\u003e\n\u003cli\u003eNo device, e-liquid or nicotine included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat is UNITECH 3.0?\u003c\/h3\u003e\n\u003cp\u003eUNITECH 3.0 is OXVA's updated NeXLIM cartridge platform. It uses an integrated dual-mesh coil and a revised liquid-management structure intended to support consistent saturation, controlled condensation and reliable contact with the device.\u003c\/p\u003e\n\u003cp\u003eOXVA describes this generation as providing \u003cstrong\u003e“3x enhanced anti-leak”\u003c\/strong\u003e performance compared with the previous cartridge design. This is a manufacturer comparison based on OXVA testing. Actual leak resistance and cartridge life vary with the e-liquid used, device settings, filling method, storage position and frequency of use.\u003c\/p\u003e\n\u003cp\u003eUnlike a replaceable-coil tank, the heating coil is built into the cartridge. When flavour becomes muted, vapour output falls, or a persistent burnt taste develops, remove the complete cartridge and install a new one.\u003c\/p\u003e\n\u003ch3\u003eCompatible OXVA NeXLIM devices\u003c\/h3\u003e\n\u003cp\u003eThese UNITECH 3.0 cartridges are compatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/oxva-nexlim-2-refillable-pod-kit\"\u003e OXVA NeXLIM 2 Refillable Pod Kit \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/oxva-nexlim-2-mini-refillable-pod-vape-kit\"\u003e OXVA NeXLIM 2 Mini Refillable Pod Kit \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/oxva-nexlim-pod-vape-kit\"\u003e OXVA NeXLIM Pod Kit \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/oxva-nexlim-go-pod-vape-kit\"\u003e OXVA NeXLIM GO Pod Kit \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility warning:\u003c\/strong\u003e NeXLIM cartridges are not direct replacements for standard OXVA XLIM V2, XLIM V3 or XLIM EZ pods. Check the device name printed on your kit before ordering.\u003c\/p\u003e\n\u003ch3\u003e0.6Ω or 0.8Ω: which NeXLIM pod should you choose?\u003c\/h3\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eResistance\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eTypical draw\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eGeneral characteristics\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eE-liquid guidance\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e0.6Ω\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOpen MTL to RDL\u003c\/td\u003e\n\u003ctd\u003eA warmer, airier draw with greater vapour output than the 0.8Ω option. Suitable for users who prefer a more open inhale and stronger airflow.\u003c\/td\u003e\n\u003ctd\u003eStart with a balanced 50VG\/50PG liquid. Because this resistance can produce more vapour per draw, lower nicotine strengths are commonly selected.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e0.8Ω\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMTL to light RDL\u003c\/td\u003e\n\u003ctd\u003eA more balanced and slightly tighter draw. This is the broader all-round option for users who prefer moderate vapour output and a more restricted inhale.\u003c\/td\u003e\n\u003ctd\u003eWell suited to balanced 50VG\/50PG nic salt or freebase e-liquid. Select nicotine strength according to your existing requirements.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eDraw tightness also depends on the airflow setting and power mode of the connected NeXLIM device. Start with the device's recommended output and make small adjustments rather than immediately using the highest available setting.\u003c\/p\u003e\n\u003ch3\u003eRecommended e-liquid\u003c\/h3\u003e\n\u003cp\u003eFor the broadest and most consistent wicking performance, begin with a \u003ca href=\"\/collections\/50-50-vape-e-liquid\"\u003e50VG\/50PG e-liquid\u003c\/a\u003e. A balanced liquid can move through the integrated cotton efficiently while remaining suitable for both MTL and restricted direct-to-lung use.\u003c\/p\u003e\n\u003cp\u003eThe cartridges can be used with \u003ca href=\"\/collections\/nic-salts\"\u003enic salt e-liquids\u003c\/a\u003e or conventional freebase e-liquid. The pod itself is supplied empty and has no inherent nicotine type or nicotine strength. Very thick, high-VG liquids may wick more slowly, particularly in cold conditions or during rapid repeated use.\u003c\/p\u003e\n\u003ch3\u003eHow to fill and prime a new NeXLIM pod\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove the new cartridge from its protective packaging.\u003c\/li\u003e\n\u003cli\u003eOpen the silicone top-fill seal carefully.\u003c\/li\u003e\n\u003cli\u003eInsert the e-liquid nozzle into the fill opening. Do not pour liquid into the central airflow channel.\u003c\/li\u003e\n\u003cli\u003eFill the chamber without overfilling and leave a small air space at the top.\u003c\/li\u003e\n\u003cli\u003eClose the seal firmly and wipe away any liquid around the pod.\u003c\/li\u003e\n\u003cli\u003eAllow the filled cartridge to stand for approximately 5–10 minutes before its first use so the cotton can become fully saturated.\u003c\/li\u003e\n\u003cli\u003eInsert the cartridge into the compatible NeXLIM device and begin at the device's recommended output.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePriming is especially important with a completely new cartridge. Using the pod before the cotton is saturated can permanently damage the coil and cause an immediate burnt taste.\u003c\/p\u003e\n\u003ch3\u003eCare and storage\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKeep the cartridge and device contacts clean and dry.\u003c\/li\u003e\n\u003cli\u003eDo not overfill the pod or force the filling seal.\u003c\/li\u003e\n\u003cli\u003eKeep some e-liquid above the visible cotton inlets during use.\u003c\/li\u003e\n\u003cli\u003eStore a filled device upright wherever practical.\u003c\/li\u003e\n\u003cli\u003eAvoid prolonged exposure to direct sunlight, vehicles or high heat.\u003c\/li\u003e\n\u003cli\u003eCondensation beneath a pod can occur during normal use; wipe it away before reinstalling the cartridge.\u003c\/li\u003e\n\u003cli\u003eReplace the cartridge if the casing, fill seal or electrical contacts are damaged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhen should the pod be replaced?\u003c\/h3\u003e\n\u003cp\u003eReplace the complete cartridge when you notice one or more of the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA persistent burnt or dry taste after confirming the pod is filled\u003c\/li\u003e\n\u003cli\u003eNoticeably muted or altered flavour\u003c\/li\u003e\n\u003cli\u003eA sustained reduction in vapour output\u003c\/li\u003e\n\u003cli\u003eRepeated flooding, gurgling or leaking that cleaning does not resolve\u003c\/li\u003e\n\u003cli\u003eVisible damage to the pod body or filling seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOXVA advertises up to 30 refills under its own test conditions. This is not a guaranteed replacement interval. Sweetened e-liquids, high output, frequent use, insufficient priming and very thick liquids can shorten cartridge life.\u003c\/p\u003e\n\u003ch3\u003eOXVA NeXLIM UNITECH 3.0 specifications\u003c\/h3\u003e\n\u003cdiv class=\"table-wrapper\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOXVA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct range\u003c\/th\u003e\n\u003ctd\u003eNeXLIM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCartridge generation\u003c\/th\u003e\n\u003ctd\u003eUNITECH 3.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCapacity\u003c\/th\u003e\n\u003ctd\u003e4ml standard \/ XL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAvailable resistances\u003c\/th\u003e\n\u003ctd\u003e0.6Ω and 0.8Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCoil type\u003c\/th\u003e\n\u003ctd\u003eIntegrated dual-mesh coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRefill method\u003c\/th\u003e\n\u003ctd\u003eTop fill\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCartridge material\u003c\/th\u003e\n\u003ctd\u003ePCTG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate dimensions\u003c\/th\u003e\n\u003ctd\u003e29 × 17 × 41mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVaping styles\u003c\/th\u003e\n\u003ctd\u003eMTL and RDL, resistance and airflow dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCompatible devices\u003c\/th\u003e\n\u003ctd\u003eNeXLIM 2, NeXLIM 2 Mini, NeXLIM and NeXLIM GO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePack quantity\u003c\/th\u003e\n\u003ctd\u003e3 cartridges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eE-liquid included\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNicotine included\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3 × OXVA NeXLIM UNITECH 3.0 4ml cartridges in the selected resistance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA device, charging cable and e-liquid are not included. Every pod in the pack has the same resistance; mixed-resistance packs are not supplied.\u003c\/p\u003e\n\u003ch3\u003eExplore compatible products\u003c\/h3\u003e\n\u003cp\u003eBrowse the complete \u003ca href=\"\/collections\/oxva\"\u003eOXVA range\u003c\/a\u003e, view the \u003ca href=\"\/collections\/oxva-xlim-series-vape-kits-replacement-pods\"\u003e OXVA XLIM and NeXLIM collection \u003c\/a\u003e, or compare other \u003ca href=\"\/collections\/replacement-pods\"\u003ereplacement pods\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eAre OXVA NeXLIM V2 pods the same as UNITECH 3.0 pods?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003e“V2” is a retailer and search shorthand used for the updated cartridge. OXVA's official product name is NeXLIM Cartridge UNITECH 3.0. This listing uses both terms so customers can identify the correct generation.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhich devices use these NeXLIM replacement pods?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThey fit the OXVA NeXLIM 2, NeXLIM 2 Mini, original NeXLIM and NeXLIM GO devices.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDo NeXLIM pods fit standard OXVA XLIM devices?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. NeXLIM cartridges are a different physical format from standard OXVA XLIM V2, XLIM V3 and XLIM EZ pods. Check the model name on your device before ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhat is the difference between 0.6Ω and 0.8Ω?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eThe 0.6Ω cartridge generally gives a warmer, airier RDL-style draw with greater vapour output. The 0.8Ω cartridge gives a more balanced and slightly tighter MTL-to-light-RDL draw.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eAre the cartridges refillable?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Open the top-fill seal, fill the chamber with compatible e-liquid, close the seal and allow a new cartridge to prime for approximately 5–10 minutes before use.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eWhich VG\/PG ratio should I use?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eA balanced 50VG\/50PG liquid is the safest general starting point for both available resistances. Thicker high-VG liquid may wick more slowly.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCan I use nic salts and freebase e-liquid?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eYes. Both types can be used when the liquid viscosity and nicotine strength are appropriate for the selected resistance and the user's existing requirements.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eDo these pods contain nicotine?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. They are empty replacement cartridges. No e-liquid or nicotine is included.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow many pods are supplied?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eEach retail pack contains three cartridges in the resistance selected when ordering.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eHow long does a NeXLIM UNITECH 3.0 pod last?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eOXVA advertises up to 30 refills under its own test conditions, but actual life varies with e-liquid, output, draw frequency, filling and priming. Replace the cartridge when flavour or vapour declines or a persistent burnt taste develops.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eIs the 4ml cartridge the UK TPD version?\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003eNo. OXVA identifies 4ml as its standard-capacity version and 2ml as its TPD version. This 4ml SKU must only be offered to destinations where local rules permit it.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cp\u003e\u003cstrong\u003eAdult-use notice:\u003c\/strong\u003e this product is intended for existing adult vapers only. Keep cartridges and any filled device out of the reach of children and pets.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"Oxva","offers":[{"title":"0.6 ohm","offer_id":54466351792474,"sku":"Oxva-NeXlim-Unitech-V2-Pods-0.6 Ohm","price":7.99,"currency_code":"GBP","in_stock":false},{"title":"0.8 ohm","offer_id":54466351825242,"sku":"Oxva-NeXlim-Unitech-V2-Pods-0.8 Ohm","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0982\/0277\/9994\/files\/NexlimV2Pods0.6.jpg?v=1784827566","url":"https:\/\/www.ukvapekings.com\/products\/oxva-nexlim-replacement-pods","provider":"UK Vape Kings","version":"1.0","type":"link"}